Instructions / Assembly

Continued...

Ramp Assembly & Installation

Step 127: Drill out 5/16” hole for top and bottom latch as shown.

Step 128: Install door latch fol-

lowing directions included with

latch.

Step 129: Layout 6’ treated ramp

pieces as shown

Note: If you did not purchase

the optional floor, the ramp is

not included.

Step 130: Find center of only one

2x4 treated ramp piece and cut

in half for ramp bottom brace.

Step 131: Layout ramp pieces

and make sure edges are pre-

cisely straight as shown.

Step 132: Measure in 12” from

each end as shown.

Step 133: Fasten cut bottom braces to bottom of ramp using 16p 3”

nails as shown.

page 36