Instructions / Assembly

Corner Trim Installation

Door Installation

Step 121: Layout corner trim

pieces as shown.

Step 122: Install corner trim pieces using 2” trim nails as shown.

Step 123: Layout doors putting

door with latch hole cutout on the

right.

Step 124: Starting with left door install doors keeping door tight

against side and 1/4” reveal at top using 2” black hinge screws as

shown.

Step 125: Install opposite door repeating previous steps as shown.

Note: It is important to keep the reveal at top of door consistent the

whole way across top of door.

Step 126: Mark location of interi-

or door latch by tapping latch

into top and bottom header as

shown.

page 35