Instructions / Assembly

page 25

Rafter Assembly & Installation

Step 67: Layout rafters and align

as shown.

Note: Make sure longer side of

rafter gusset is on longer rafter.

Step 66: Each rafter consists of

1-2x4x96” long, 1-2x4x86-1/4”

long, and two rafter gussets (end

rafters have only one gusset.

Note: End rafters have a left

and right, make sure to assem-

ble with gusset of opposite

side as shown.

Step 68: First assemble 2 end

rafters by fastening one rafter

gusset to rafters using 2” 6p nails

as shown.

Step 69: Assemble remaining 7

rafters by fastening a rafter gus-

set to each side of rafter.

Step 70: Install first end rafter

making sure gusset is facing

inside. Rafter should overhang

wall 1/2”.

Step 71: Fasten rafter to top of wall and into bottom of rafter as

shown.

Note: End of rafter should be flush with end of soffit, if needed adjust

rafter by pushing back and forth.

Step 72: Install remaining rafters

keeping them spaced exactly 2 ft.

apart.