Instructions / Assembly

Page 23

Sidewall Siding Installation

Step 57: Make a mark at both ends of wall even with bottom of sid-

ing and snap a line. Hammer 4 nails spaced approximately 2 apart

on line.

Step 58: Layout 2 full siding

sheets and 1 sheet as shown.

Step 58: Install first full sheet of siding by resting it on nails along bottom. Align siding piece at top and

end of wall, siding splice should fall on the center of wall stud. Nail off siding every 8” using 2-1/2” 7p

penny nails.

Step 59: Install remaining siding pieces repeating previous step.

Last siding piece should be flush with end of wall.

Step 60: Repeat on opposite

wall.