Instructions / Assembly

Step 23: Remove four 4’x85” sheets siding and layout on wall as shown.

Step 24: Start siding with over-

lap at corner with 1” overhang

at end of wall.

Step 25: Siding edge should

center on wall stud as shown.

Step 26: Fasten siding to

walls using 7p 2-1/4” galva-

nized penny nails every 8”.

Step 28: Mark and cut off

excess siding as shown.

Step 27: Install next siding piece as shown, keeping groove reveal

consistent with other openings on sheet. Repeat to end of wall.

page 13

Step 29: Lift and set wall as

shown.

Step 30: Fasten wall to floor

using 16p 3” nails every 8”.

Step 31: Fasten siding to floor

using 7p 2-1/4” galvanized

penny nails every 8”.