Instructions / Assembly

Step 29: Paint playhouse and

trim desired colors, with paint

purchased separately.

Step 30: Apply victorian style trim to gable ends. Align trim flush

with front roof edge and top of plywood. Nail with 2 nails at bottom.

of trim piece. Keep nails up so metal drip edge will cover.

Note: Do not nail trim at peak until back trim piece is aligned

and fastened at bottom.

Step 31: Repeat on back side of gable. Nail peak only after front

and back pieces have both been nailed at the bottom. Line up

points and nail peak. Finish nailing trim every 12". Repeat steps 30

and 31 on opposite gable end.

See step 32 on following

page...

Step 27 (... cont) nail V-strip

into plywood at top and bottom

of strip (if nails stick out

through roof, bend flat against

roof).

Playhouse should now look like

this.

page 9

Step 28: From outside, screw

through plywood into V strips.

Use 14 1-1/4” screws per val-

ley (make sure screws are kept

within 1 ¼ " of valley).