Instructions / Assembly

Step 11: Set remaining gable

wall section repeating previous

steps.

Step 12: Push walls tightly together, nail corners and along bottom

of siding around perimeter of building using, 1¾" galvanized nails

as shown.

Note: Keep nails within 1-1/2” of edges of corners so nail

heads are covered by corner trim

Step 13: Install door handles as shown.

Step 9: cont... Push walls tightly together at top and bottom. Fasten

gable wall to front and back wall sections as shown. Attach bottom

plate to floor repeating previous steps.

Step 10: Remove door stabi-

lizer from gable door section.

page 5

Step 14: When installing

inside of door handle, keep

interior and exterior handles

vertically aligned as shown.