Instruction Manual
Table Of Contents
- 1 Hinweise zur Anleitung
- 2 Gefahrenhinweise
- 3 Funktion und Geräteübersicht
- 4 Allgemeine Systeminformationen
- 5 Montage
- 6 Inbetriebnahme
- 6.1 Installationshinweise
- 6.2 Installation
- 6.3 Verhalten nach Einschalten der Netzspannung
- 6.4 Anlernen
- 6.4.1 Anlernen an den Homematic IP Wandthermostaten
- 6.4.2 Anlernen an die Homematic IP Multi IO Box
- 6.4.3 Einen weiteren Fußbodenheizungscontroller hinzufügen
- 6.4.4 Anlernen an den Homematic IP Access Point
- 7 Konfiguration über den Homematic IP Wandthermostaten
- 8 Manuelle Bedienung
- 9 Geräteverknüpfungen löschen
- 10 Fehlerbehebung
- 11 Wiederherstellung der Werkseinstellungen
- 12 Wartung und Reinigung
- 13 Allgemeine Hinweise zum Funkbetrieb
- 14 Technische Daten
- 1 Information about this manual
- 2 Hazard information
- 3 Function and device overview
- 4 General system information
- 5 Mounting
- 6 Start-up
- 7 Configuration via the Homematic IP Wall Thermostat
- 8 Manual operation
- 9 Delete device connections
- 10 Troubleshooting
- 11 Restore factory settings
- 12 Maintenance and cleaning
- 13 General information about radio operation
- 14 Technical specifications
78
Technical specifications
14 Technical specifications
Device short description: HmIP-FAL24-C10
Construction of the regulation
and control device: independently mount-
ed electronic regulation
and control device,
surface mount
Number of heating zones: 10
Number of actuators: 15 / (14)
Number of pumps: 1
Supply voltage: 24 V/50 Hz
Current consumption: 1.25 A max.
Switching capacity per
heating zone: 1 A max.
Nominal load of all actuators: 24 W
Cable type and cross section: rigid and flexible cable,
0.75 - 1.5 mm²
Cable cross section of cable
bushing 1: > 5.2 mm
Cable cross section of cable
bushing 2: > 8.2 mm
Cable cross section of cable
bushing 3: > 3.2 mm
Degree of protection: IP20
Protection class: III
Ambient temperature: 0 - 50°C
Type: 1
Withstand voltage: 2500 V