Instruction Manual

61
Start-up
6.4.4 Adding to the Homematic IP Access Point
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU3. For detailed information, please refer to
the Homematic IP User Guide, available for
download in the download area of
www.homematic-ip.com.
To add the floor heating controller to the Access Point,
please proceed as follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item “Add device”.
• Briefly press the system button (A) until the LED
quickly starts flashing orange (see fig. 7). The pair
-
ing mode of the selected channel remains activat-
ed for 3 minutes.
You can manually start the pairing mode for an-
other 3 minutes by pressing the system button (A)
briefly (see fig. 7).
• Your device will automatically appear in the
Homematic IP app.