Instruction Manual
Table Of Contents
- 1 Hinweise zur Anleitung
- 2 Gefahrenhinweise
- 3 Funktion und Geräteübersicht
- 4 Allgemeine Systeminformationen
- 5 Montage
- 6 Inbetriebnahme
- 6.1 Installationshinweise
- 6.2 Installation
- 6.3 Verhalten nach Einschalten der Netzspannung
- 6.4 Anlernen
- 6.4.1 Anlernen an den Homematic IP Wandthermostaten
- 6.4.2 Anlernen an die Homematic IP Multi IO Box
- 6.4.3 Einen weiteren Fußbodenheizungscontroller hinzufügen
- 6.4.4 Anlernen an den Homematic IP Access Point
- 7 Konfiguration über den Homematic IP Wandthermostaten
- 8 Manuelle Bedienung
- 9 Geräteverknüpfungen löschen
- 10 Fehlerbehebung
- 11 Wiederherstellung der Werkseinstellungen
- 12 Wartung und Reinigung
- 13 Allgemeine Hinweise zum Funkbetrieb
- 14 Technische Daten
- 1 Information about this manual
- 2 Hazard information
- 3 Function and device overview
- 4 General system information
- 5 Mounting
- 6 Start-up
- 7 Configuration via the Homematic IP Wall Thermostat
- 8 Manual operation
- 9 Delete device connections
- 10 Troubleshooting
- 11 Restore factory settings
- 12 Maintenance and cleaning
- 13 General information about radio operation
- 14 Technical specifications
50
Function and device overview
3 Function and device overview
The Homematic IP Floor Heating Controller oers com-
fortable and demand-based room-by-room control of
your floor heating system via smartphone app or the
Homematic IP Wall Thermostat, according to your per-
sonal needs.
The floor heating controller can be used for controlling
a floor heating system with up to 10 heating zones/15
heating circuits as well as a heating pump or circulation
pump. Furthermore, the device oers operation in heating
or cooling mode (provided that your heating system oers
these operating modes).
You can flexibly mount the device using the supplied
screws or a DIN rail. With the secure radio communica-
tion between the Homematic IP devices, the wiring eort
is kept to a minimum.
Device overview (see fig. 1):
(A) System button (pairing button and LED)
(B) Select button (channel button and LED)
(C) Slot for opening
(D) Cover
(E) Spring latch for DIN rail mounting
(F) 24 V transformer connecting terminals
(G)
Heating valves or heating pump connecting terminals
(H) Heating valves connecting terminals