Instructions
63
Configuration menu
The menu automatically closes without applying changes
if there is no operation for more than 1 minute.
6.1 Automatic mode
6.2
Manual operation
6.3
Oset temperature
6.4
Programming of heating profiles
6.5
Operating lock
6.6
Date and time
6.7
Holiday mode
6.1 Automatic mode
Switching from manual to automatic mode is
only possible if the date and time have been set.
In automatic mode, the temperature is controlled in
accordance with the set heating profile. Manual changes
are activated until the next point at which the profile
changes. Afterwards, the defined heating profile will be
activated again. To activate the automatic mode, please
proceed as follows:
• Press and hold down the menu button (E) to
open the configuration menu.
• Select “Auto” via the plus and minus buttons (D +