Instructions

59
Start-up
5.2.1 Adhesive strip mounting
For mounting the wall thermostat using the adhesive
strips, please proceed as follows:
• Choose a site for installation.
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and
solvents and not too cold to ensure long-time
adherence.
• Insert the electronic unit (A) into the mounting
plate
(see figure 7) . Make sure that the electronic
unit properly engages into the mounting plate.
• Fix the adhesive strips on the back side of the
mounting plate in the provided area. You should
be able to read the letters (“TOP”) on the back side
(see figure 8).
• Remove the protective film from the adhesive
strips (see figure 9).
• Press the assembled wall thermostat with the
back side to the wall in the position where it
should subsequently be attached (see figure 9).
5.2.2 Screw mounting
For mounting the wall thermostat by screws, please
proceed as follows:
• Choose a site for installation.