Instructions

53
Start-up
5 Start-up
5.1 Teaching-in
Read this entire section before starting the
teach-in procedure.
You can either pair the wall thermostat directly with one
or more Homematic IP devices or teach-in the device
to the Homematic IP Access Point (HmIP-HAP). After
direct pairing, configuration has to be done directly
on the device. After teaching-in to the Access Point,
configuration is done via the Homematic IP smartphone
app.
5.1.1 Direct pairing
You can connect the Homematic IP Wall
Thermostat to a Homematic IP Floor Heating
Actuator (HmIP-FALx-Cx, HmIP-FALMOT-Cx), a
Homematic IP Radiator Thermostat – basic
(HmIP-eTRV-B) or a Homematic IP Window- and
Door Contact with magnet (HmIP-SWDM).
Please make sure you maintain a distance of at
least 50cm between the devices.
You can cancel the pairing procedure by briefly
pressing the system button (C) again. This will be
indicated by the device LED (C) lighting up red.