operation manual
Table Of Contents
- 1 Information about this manual
- 2 Hazard information
- 3 Function and device overview
- 4 General system information
- 5 Start-up
- 6 Operating modes and configuration
- 7 Operation
- 8 Replacing batteries
- 9 Troubleshooting
- 10 Restore factory settings
- 11 Maintenance and cleaning
- 12 General information about radio operation
- 13 Technical specifications
75
Operating modes and configuration
6.6 Date and time
To set the date and time, please proceed as follows:
• Press and hold down the control wheel (E) to
open the configuration menu.
• Select the
symbol by turning the control wheel
and confirm by pressing the control wheel briefly.
• Set the year, month, day and hour by turning
the control wheel and confirm by pressing the
control wheel briefly.
6.7 Oset temperature
As the temperature is measured on the wall thermostat,
the temperature distribution can vary throughout a room.
To adjust this, a temperature oset of ±3.5 °C can be set.
If a nominal temperature of e.g. 20 °C is set but the room
presents with only 18 °C, an oset of -2.0 °C needs to
be set. An oset temperature of 0.0° is set in the factory
settings. To adjust the oset temperature, please proceed
as follows:
• Press and hold down the control wheel (E) to
open the configuration menu.
• Select the
symbol by turning the control
wheel and confirm by pressing the control wheel
briefly.
• Turn the control wheel until the desired
temperature appears (±3.5 °C maximum).
• Confirm by pressing the control wheel briefly.