operation manual
Table Of Contents
- 1 Information about this manual
- 2 Hazard information
- 3 Function and device overview
- 4 General system information
- 5 Start-up
- 6 Operating modes and configuration
- 7 Operation
- 8 Replacing batteries
- 9 Troubleshooting
- 10 Restore factory settings
- 11 Maintenance and cleaning
- 12 General information about radio operation
- 13 Technical specifications
64
Operating modes and configuration
5.2.4 Installation in multiple combinations
You can mount the wall thermostat with the attachment
frame (A) provided or use it with frames of other
manufacturers as well as integrate the electronic unit (B)
into a multi-gang frame. You can flexibly fix the mounting
plate (F) to the wall using adhesive strips or screws. For
mounting with multiple combinations, make sure that
the mounting plate of the wall thermostat is seamlessly
aligned to the already fixed mounting plate/retaining ring.
The wall thermostat is designed to fit into frames supplied
by the following manufacturers:
Manufacturer Frame
Berker S.1, B.1, B.3, B.7 glass
ELSO Joy
GIRA System 55, Standard 55, E2, E22,
Event, Esprit
merten 1-M, Atelier-M, M-Smart, M-Arc, M-
Star, M-Plan
JUNG A 500, AS 500, A plus, A creation
6 Operating modes and
configuration
After teaching-in and mounting the device, you can
individually adjust the settings to your personal needs via