operation manual

Restore factory settings

8 Restore factory settings

The factory settings of the device can be re-

stored. If you do this, you will lose all your set-

tings.

To restore the factory settings of the switch actuator,

please proceed as follows:

• Press and hold down the system button

(A)

for 4

seconds until the LED quickly starts ﬂashing or-

ange (

see ﬁg. 5).

• Release the system button again.

• Press and hold down the system button again for

4 seconds, until the LED lights up green.

• Release the system button to ﬁnish the proce-

dure.

The device will perform a restart. After the restart, you

can again integrate your device into your Homematic IP

system.