operation manual

49
Start-up
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(A) briefly (see figure 5).
Your device will automatically appear in the
Homematic IP app.
To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
Please wait until teach-in is completed.
If teaching-in was successful, the LED lights up
green. The device is now ready for use.
If the LED lights up red, please try again.
In the app, select in which applications you want
to use your device.
Allocate the device to a room and give the device
a name.