operation manual

48
Start-up
6.4 Teaching-in
Please read this enre secon before starng
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device to the Access Point or
to the Central Control Unit CCU2/CCU3. For
detailed information, please refer to the
Homematic IP User Guide, available for download
in the download area of www.eQ-3.com.
To integrate the switch actuator into your system and
enable it to communicate with other devices, you must
teach it in first.
To teach-in your switch actuator to the Access Point,
please proceed as follows:
Open the Homematic IP app on your smart-
phone.
Select the menu item “Teach-in device”.
Briefly press the system button (A) until the LED
quickly starts flashing orange (see fig. 5). Pairing
mode remains activated for 3 minutes.