operation manual

Start-up

according to VDE 0100 and HD382 or 60364

have to be considered. Users must be able to

easily access the cable protection switch. This

must be marked as disconnecting device for the

actuator.

Please observe the hazard information in section

„2 Hazard information“ on page 34

during in-

stallation

Permitted cable cross sections for the connecting termi-

nals C - F are:

Rigid cable Flexible cable with/

without ferrule

1.0 - 2.5 mm² 1.0 - 2.5 mm²

Permitted cable cross sections for the connecting termi-

nals G are:

Rigid cable Flexible cable with/

without ferrule

1.0 - 1.5 mm² 0.5 - 1.0 mm²

The permitted cable diameter for all cable bushings are

8 to 11 mm.