operation manual
39
General system information
4 General system information
This device is part of the HomematicIP smart home sys-
tem and works with the Homematic IP radio protocol. All
devices of the system can be configured comfortably and
individually with the Homematic IP smartphone app. Al-
ternatively, you can operate the Homematic IP devices via
the Central Control Unit CCU2/CCU3 or in connection
with various partner solutions. The available functions
provided by the system in combination with other com-
ponents are described in the Homematic IP User Guide. All
current technical documents and updates are provided at
www.eQ-3.com.
5 Mounting
You can flexibly mount the switch actuator for heating
systems on walls using the supplied screws and plugs. To
do this, please proceed as follows:
• Please select a suitable mounting location close
to your heating system.
Make sure that no electricity or similar lines run in
the wall at this location!
• Open the cover (B). Therefore, unscrew both
lower screws with an appropriate screwdriver and
remove the cover afterwards (see fig. 2+3).
• Use a pen to mark the positions of the four bore