operation manual

43
Restore factory settings
8 Restore factory settings
The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the device, proceed as
follows:
• Open the battery compartment (C) by first pulling
the cover cap (B) a little backwards and then up-
wards (see figure 2).
• Remove a battery.
• Re-insert the battery making sure that it is right
way around while pressing the system button (F)
at the same time. Press and hold down the sys-
tem button until the device LED (F) starts to flash
quickly orange (see figure 9).
• Release the system button briefly and then press
and hold the system button again until the or-
ange flashing changes to a green lighting (see
figure 10).
• Release the system button to finish the proce-
dure.
The device will perform a restart.