operation manual

37
Start-up
5.2.2 Adhesive strip or screw mounting
You can use
• the supplied double-sided adhesive strips or
• the supplied screws
to fix the device to the window/door frame.
Adhesive strip mounting
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and
solvents and not too cold to ensure long-time
adherence.
For mounting the device using the adhesive strips, please
proceed as follows:
• Place the cap (B) on the electronic unit (A) .
• Attach the double-sided adhesive strips to the
back of the electronic unit (A), remove the film
and press the the device to the desired position of
the window/door frame (see figure 5).
For residue-free and easy removal of the adhe-
sive strips, allow the adhesive strips to protrude
slightly over the edge of the housing.
Screw mounting
Using screws will damage the window and/or
door. For those living in rented accommodation,
this could lead to a landlord making claim for
compensation or holding back a tenant’s deposit.