operation manual

35
Start-up
compartment of the window / door contact.
• Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(F) shortly (see figure 3).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, please see the sticker supplied or
attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED (F) lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• In the app, select in which applications you want
to use your device (climate control and/or secu-
rity, for example).
• Allocate the device to a room and give the device
a name.
• Do not yet place the cap!
5.2 Mounting
Please read this entire section before starting to
mount the device.