operation manual

36
37
Troubleshooting
Troubleshooting
8.3 Error codes and flashing sequences
Flashing code Meaning Solution
Fast orange
flashing
Configuration
data is trans-
mitted
Wait until the trans-
mission is completed.
1x long green
lighting
Operation
confirmed
(teach-in or
restoring fac-
tory settings)
You can continue
operation.
1x long red
lighting
Operation
failed (teach-in
or restoring
factory set-
tings) or duty
cycle limit is
reached
Please try again (or
see sec. “8.2 Duty cy-
cle” on page 35).
Short
orange light-
ing
Batteries
empty
Replace the batteries
of the device (see “7
Replacing batteries”
on page 33).
Short orange
flashing
(every 10 s)
Teach-in
mode active
(for 3 minutes)
Please enter the last
four numbers of the
device serial number
to confirm (see „6
Start-up“ on page
26).
6x long red
flashing
Device
defective
Please see your app
for error message or
contact your retailer.
1x orange
and 1 x green
lighting (after
inserting bat-
teries)
Test display Once the test display
has stopped, you can
continue.
Long and
short orange
flashing
(alternating)
Device soft-
ware update
(OTAU)
Wait until the update
is completed.