operation manual

35
Start-up
dows that are hinged on the left or right. Please
find out, if your window is hinged on the left or
on the right.
If the hinges are on the left side, your window is
hinged to the left. If the hinges are on the right
side, your window is hinged to the right.
• You can set the hinge side by turning the arrow
on the eccentric (B) to the corresponding letter
(R for hinged on the right side and L for hinged
on the left side).
• Turn the window handle into a horizontal position
(see figure 6).
• Push the window handle on the window handle
sensor and reattach the handle to the window by
tightening the screws (H).
• Close the cover.
If there are deformations on the window handle
square (due to mechanical loads), please remove
them using a file in order to ensure that the win-
dow handle can slide on the window handle sen-
sor without causing damages.
Tighten the screws only with light pressure. The
eccentric (B) may not be fixed too strong, so that
it cannot follow the rotation of the square.