operation manual

34
Start-up
5.3 Changing the cover
You can replace the white cover by the silver one sup-
plied. To do this, proceed as follows:
• Remove the battery compartment cover (D) (see
figure 2).
• Release the catch of the cover at the three
marked positions (see figure 5).
• Pull the electronic (C) rearwards (see figure 5).
• Place the silver cover.
5.3.1 Removing the window handle
Before mounting the window handle sensor, you first
have to remove the old window handle. To do this, pro-
ceed as follows:
• Slightly lift the cover (G) of the window handle
and turn it around so you can see the screws (H)
(see figure 6).
• Turn the window handle into a horizontal position
(see figure 6).
• Loosen the screws (H) with a screwdriver.
• Remove the window handle.
5.3.2 Mounting the window handle sensor
After having removed the window handle, you can mount
the Homematic IP Window Handle Sensor as follows:
• The window handle sensor can be used with win-