operation manual

33
Start-up
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (F)
shortly (see figure 3).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up
green. The device is now ready for use.
• If the LED lights up red, please try again.
• Select the desired solution for your device.
• In the app, give the device a name and allocate
it to a room.
5.2 Mounting
Please read this entire section before starting to
mount the device.
The window handle sensor is mounted under the window
handle and is fixed to the window in this way (see figure
4). There are no additional bore holes required.