operation manual

40
Teaching-in
(E) to open the battery compartment cover (C)
(see fig. 3).
• Remove the insulation strip from the battery
compartment (C) to activate the device. Teach-in
mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(D) briefly (see fig. 7).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED (D) lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• Please select, in which application (e.g. security
and/or light) you would like to use the device.
• Allocate the device to a room and give the device
a name.
• Reattach the cover (E) .