operation manual

39
Teaching-in
6 Teaching-in
Please read this entire section before starting
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to
the Homematic IP User Guide, available for
download in the download area of
www.eQ-3.com.
To integrate the passage sensor into your system and
enable it to communicate with other devices, you must
teach it in first.
To teach-in your passage sensor to the Access Point,
please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device”.
• Slightly press the catch on the side of the device
and remove the electronic unit (A) from the cover