operation manual
37
Mounting
The eectiveness of the detection procedure de-
pends on the temperature dierence between
the moving object and the relevant background.
The detection range should not be aligned di-
rectly to windows, heatings or any other heat
sources.
It is not possible to detect motion through glass.
False alarms caused by moving heat sources be-
hind a window cannot be excluded by 100 %.
5.2 Adhesive strip mounting
For mounting the passage sensor using the adhesive
strips, please proceed as follows:
• Select the desired mounting location (e.g. a door
frame).
Make sure that the mounting surface is smooth, solid,
non-disturbed, free of dust, grease and solvents and
not too cold to ensure long-time adherence.
• Fix the adhesive strips (F) on the back side of the
passage sensor in the provided area (see fig. 2).
• Remove the protective film from the adhesive
strips.
• Press the device with the back side to the desired
position on the wall or door frame.