operation manual

35
Start-up
6 Start-up
Please read this entire section before starting to
use the device.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the motion detector into your system and
enable it to communicate with other Homematic IP de-
vices, you must teach-in the device to your Homemat-
icIP Access Point first.
To teach-in the motion detector, please proceed as fol-
lows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device”.
• Open the battery compartment (C) on the rear
by pushing the battery compartment cover (D)
down (see fig. 4).
• Remove the insulation strip from the battery
compartment (C) of the motion detector to acti-
vate the device. Teach-in mode remains activated
for 3 minutes.