operation manual

Mounting

5 Mounting

Due to the supplied stand (D) and the wall mounting

bracket (E) you can mount the motion detector anywhere

in the room.

If you want to place the motion detector e.g. on a shelf

or cabinet you can use the already ﬁxed stand (D) and

place the device at the desired location after you have put

the device into operation (see sec. „6 Start-up“ on page

35).

If you want to mount the device to a wall, please proceed

as described in the next section.

5.1 Installation with wall mounting bracket

The installation of the motion detector on a wall or in a

corner is simple and easy with the supplied wall mount-

ing bracket (E).

You can install the motion detector

• with the supplied screws and plugs or

• with the supplied adhesive strips.