operation manual
Start-up
21
• Follow the instructions of the app step by step.
• In the app, select the solution in which the de-
vice is used, give the device a name and create
a new room or allocate it to an existing room.
Please define the device names very carefully in
order to avoid assignment errors when using
various devices of the same type. You can also
change the device and room names later on.
5.3 Operation and configuration
After teaching-in your device successfully and alloca-
ting it to a room you can comfortably control and con-
figure your Homematic IP system.
For further information regarding operation of the app
and configuration of the Homematic IP system, please
refert to the Homematic IP User Guide (available for
download at www.eQ-3.de).
If the LED lights up dierently, please follow the
instructions in the app or see „6.3 Error codes
and flashing sequences“ on page 22.
• The Access Point is registered to the server.
This may take a few minutes. Please wait.
• After successful registration, please press the
system button of your Access Point for con-
firmation.
• Teaching-in will be carried out.
• The Access Point is now set up and immedi-
ately ready for use.
5.2 First steps: Teaching-in devices and
adding rooms
As soon as your Homematic IP Access Point and the
Homematic IP app are ready for use, you can teach-in
additional Homematic IP devices and allocate them in
the app to dierent rooms.
• Tap on the menu symbol ( ) in the top left of
the screen of your app and select the menu
item “Teach-in device”.
• Establish the power supply of the device you
want to teach-in, in order to activate the
teach-in mode. For further information, please
refer to the operating manual of the corre-
sponding device.