Instructions
Table Of Contents
- 1 Information about this manual
- 2 Hazard information
- 3 Function and device overview
- 4 General system information
- 5 Start-up
- 6 Operation
- 7 Behaviour after power recovery
- 8 Troubleshooting
- 9 Restore factory settings
- 10 Maintenance and cleaning
- 11 General information about radio operation
- 12 Technical specifications
40
Technical specifications
Hereby, eQ-3 AG, Maiburger Str. 29, 26789 Leer/
Germany declares that the radio equipment type
Homematic IP HmIP-PS-2 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.homematic-ip.com
12 Technical specifications
Device short description:
HmIP-PS-2
Supply voltage: 230 V/50 Hz
Current consumption: 13 A max.
Standby power consumption: < 0.2 W
Max. switching capacity: 3 kW
Kind of load: ohmic load
Life expectancy relay/
switching cycle: 40000 (13 A, ohmic load)
Relay: NO contact, 1-pole, µ
contact
Switch type: independently mounted
switch
Operating mode: S1
Withstand voltage: 2500 V
Protection class: I
Method of operation: Type 1
Degree of protection: IP20
Ambient temperature: -10 to +35 °C
Degree of pollution: 2