User manual

36
Restore factory settings
1x long red
lighting
Transmission
failed or duty
cycle limit is
reached
Please try again (see
sec. “8.1 Command
not confirmed” on
page 33 or “8.2
Duty cycle” on page
34).
6x long red
flashing
Device
defective
Please see your app
for error message
or contact your
retailer.
1x orange
and 1 x green
lighting (after
plugging into a
socket)
Test display Once the test
display has stopped,
you can continue.
9 Restore factory settings
The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the pluggable dimmer,
please proceed as follows:
• Unplug the device from the socket (see figure 2).
• Plug in the device into the socket again while
pressing and holding down the system button (A)