User manual

Operation

device number (SGTIN) in your app or scan the

QR code. Therefore, please see the sticker sup-

plied or attached to the device.

• Please wait until teach-in is completed.

• If teaching-in was successful, the LED lights up

green. The device is now ready for use.

• If the LED lights up red, please try again.

• Please select, in which application (e.g. light and/

or security) you would like to use the device.

• In the app, give the device a name and allocate

it to a room.

After teaching-in, you can simply plug in loads into the

switched-o pluggable dimmer and dim as well as switch

devices on or o. Especially observe the safety instruc-

tions in the chapters “2 Hazard information” on page

23 and “6 Operation” on page 31.

6 Operation

After teaching-in and installing have been performed,

simple operations are available directly on the device.

• Press the system button (A) shortly to switch

connected loads on and o.

• Press and hold down the system button (A) to

lower or increase the brightness level of your

connected loads.