User manual

30
Start-up
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to
the Homematic IP User Guide, available for down-
load in the download area of www.eQ-3.de.
To integrate the pluggable dimmer into your system
and enable it to communicate with other HomematicIP
devices, you must teach-in the device to your
HomematicIP Access Point first.
To teach-in the pluggable dimmer, please proceed as
follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item “Teach-in device”.
• Plug in the pluggable dimmer into the desired
socket (see figure 2).
• Pairing mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (A)
shortly (see figure 3). The pluggable dimmer will
be switched on or o (depending on the previous
state).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the