User manual

Hazard information

Do not connect multiple pluggable switches

into one another.

If you use the device in a security application it has

to be operated in connection with an UPS

(uninterruptible power supply) in order to bridge

possible power failure according to EN 50130-4.

If the dimming actuator is operated with electronic

transformers, only those which meet the

requirements of DIN EN 61347-1 (VDE 0712-30,

Part 1) along with DIN EN 61047 /VDE 0712-25,

Part 2) may be used.

Only dimmable 230 V LED lamps may be used. Not

dimmable 230 V LED lamps may destroy the

device and/or the light source.

Switching on of loads during power-on state

(dimming level unequal to 0) is not permitted.

Doing so may generate very high inrush currents

that can destroy the device.

The dimming actuator is only suitable for light

bulbs and high-voltage and low-voltage halogen

lamps with conventional transformers! Please only

connect lamp loads to the dimming actuator, and

no televisions, computers, motors etc.