operation manual

37
Operation
Improper usage or a defective installation (e.g.
low-quality or defective plugs or sockets) can
lead to overheating of the pluggable dimmer. The
integrated temperature control automatically
switches o the load. The devices is protected
against overheating and secure operation is
ensured. As soon as the temperature reaches a
non-critical value, you can switch on the
pluggable dimmer again. Always observe the
permitted ambient temperature of the device
and, if necessary, have the installation checked
for possible error sources by an expert.
Switching on of loads during power-on state
(dimming level unequal to 0) is not permitted.
Doing so may generate very high inrush currents
that can destroy the device.