operation manual

32
Hazard information
The dimming actuator is only suitable for light
bulbs and high-voltage and low-voltage halogen
lamps with electronic transformers as well as
dimmable LED lamps! Please only connect ohmic
and capacitive lamp loads to the dimming actua-
tor, and no televisions, computers, motors etc.
Please note that 230V LED lamps may glow or
flash while they are switched o due to the very
low power consumption.
The dimming actuator contains a thermal cut-o.
Please note that in the event of overheating the
loads will be switched o completely.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall
invalidate any warranty or liability. This also applies
to any conversion or modification work. The
device is intended for private use only.
The device may only be operated within residen-
tial buildings.