operation manual
65
Technical specifications
The range of transmission within buildings can
dier greatly from that available in the open air.
Besides the transmitting power and the reception
characteristics of the receiver, environmental
factors such as humidity in the vicinity have an
important role to play, as do on-site structural/
screening conditions.
eQ-3 AG hereby declares that this device complies with
the essential requirements and other relevant regulations
of Directive 1999/5/EC. You can find the full declaration
of conformity at www.eQ-3.de.
11 Technical specifications
Device short description: HmIP-MIOB
Supply voltage: 230 V/50 Hz
Current consumption: 16 A max.
Standby power consumption: 250 mW
Max. switching capacity:
Output 1: 3680 W, cos
φ
≥0,95
(floating)
Output 2: 1840 W, cos
φ
≥0,95
(floating)
Cable type and cross section: rigid and flexible cable,
0.75 - 2.5 mm²
Kind of load: ohmic load
Method of operation: Type 1.B