operation manual
42
Hazard information
to carry out work on the 230 V mains. Applicable
accident prevention regulations must be
complied with whilst such work is being carried
out. To avoid electric shocks from the device,
please disconnect the
mains voltage (trip the
miniature circuit-breaker).
Noncompliance with
the installation instructions can cause fire or
introduce other hazards.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
Please take the technical data
(in particular the
maximum permissible eective installed load of
the device and the type of load to be connected)
into account before connecting a load! All load
data relates to ohmic loads. Do not exceed the
capacity
specified for the device.
The device has not been designed to support
safety disconnection.
Exceeding this capacity could lead to the
destruction of the device, fires or electric shocks.
Before the actuator is connected, remove the
fuse from the fuse box
.