operation manual
41
Hazard information
The device may only be operated in dry and dust-
free environment and must be protected from 
the eects of moisture, vibrations, solar or other 
methods of heat radiation, cold and mechanical 
loads.
The device is not a toy; do not allow children to 
play with it. Do not leave packaging material lying 
around. Plastic films/bags, pieces of polystyrene, 
etc. can be dangerous in the hands of a child.
We do not assume any liability for damage to 
property or personal injury caused by improper 
use or the failure to observe the hazard 
information. In such cases, any claim under 
warranty is extinguished! For consequential 
damages, we assume no liability!
The device may only be used for fixed installations. 
The device must be securely attached within a 
fixed installation.
The actuator is part of the building installation. 
The relevant national standards and directives 
must be taken into consideration during planning 
and set-up. The device has been designed solely 
for operation on a 230 V/50 Hz AC supply. Only 
qualified electricians (to VDE 0100) are permitted 










