Instructions

31
Operation
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (F)
shortly (see figure 3).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
• Wait until the connection is completed.
• If teaching-in was successful, the device LED (A)
lights up green. The device is now ready for use.
If the device LED lights up red, please try again.
• In the app, give the device a name and allocate
it to a room.
6 Operation
Once you have connected the Homematic IP Key Ring
Remote Control to the Access Point, you can control the
access control functions in combination with the Home-
matic IP Door Lock Drive. The following functions are
possible: