operation manual

30
Start-up
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the key ring remote control into your system
and enable it to communicate with other Homematic IP
devices, you must teach-in the device to your Homemat-
ic IP Access Point first.
To teach-in the key ring remote control, please proceed
as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device”.
• Open the battery compartment (H) at the rear
by pushing the battery compartment cover away
from the device. You will need to apply some
pressure to do this (see figure 2).
• This will open the catch and the battery compart-
ment cover can be opened (the cover remains
attached to the housing).
• Remove the insulation strip from the battery
compartment (H) of the key ring remote control
to activate the device. Teach-in mode remains
activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(G) shortly (see figure 3).