operation manual

39
Restore factory settings
Fast orange
flashing
Stage before
restoring the
factory settings
Press and hold
down the system
button again for
4 seconds, until
the LED lights up
green.
1x long green
lighting
Reset confirmed You can continue
operation.
1x long red
lighting
Reset failed Please try again.
7 Restore factory settings
The factory settings of your Access Point as well as of
your entire installation can be restored. The operations
distinguish as follows:
• Resetting the Access Point:
Here, only the factory settings of the Access
Point will be restored. The entire installation will
not be deleted.
• Resetting and deleting the entire installation:
Here, the entire installation is reset. Afterwards,
the app has to be uninstalled and reinstalled.
The factory settings of your single Homematic IP
devices have to be restored as to enable them to
be connected again.