User manual

General information about radio operation Technical specifications
30
31
Instructions for disposal
Do not dispose of the device with regular do-
mestic waste! Electronic equipment must be
disposed of at local collection points for waste
electronic equipment in compliance with the
Waste Electrical and Electronic Equipment Di-
rective.
Information about conformity
The CE sign is a free trading sign addressed ex-
clusively to the authorities and does not in-
clude any warranty of any properties.
For technical support, please contact your re-
tailer.
10 Technical specifications
Device short description: HMIP-HAP
Supply voltage
plug-in mains adapter (input): 100 V-240 V/50 Hz
Power consumption
plug-in mains adapter: 1.5 W max.
Supply voltage: 5 V
DC
Current consumption: 500 mA max.
Standby
power consumption: 1.1 W
Degree of protection: IP20
Ambient temperature: 5 to 35 °C
Dimensions (W x H x D): 118 x 104 x 26 mm
Weight: 153 g
Radio frequency: 868.3 MHz/
869.525 MHz
Receiver category: SRD category 2
Typ. open area RF range: 400 m
Duty cycle: < 1% per h/
< 10% per h
Network: 10/100 MBit/s,
Auto-MDIX
Subject to technical changes.
9 General information about radio
operation
Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possi-
bility of interference occurring. Interference can also
be caused by switching operations, electrical motors
or defective electrical devices.
The range of transmission within buildings can
dier greatly from that available in the open air.
Besides the transmitting power and the recep-
tion characteristics of the receiver, environ-
mental factors such as humidity in the vicinity
have an important role to play, as do on-site
structural/screening conditions.
eQ-3 AG hereby declares that this device complies
with the essential requirements and other relevant reg-
ulations of Directive 1999/5/EC. You can find the full
declaration of conformity at www.eQ-3.de.