User manual

Start-up Start-up
24
25
5.2 First steps: Teaching-in devices and
adding rooms
As soon as your Homematic IP Access Point and the
Homematic IP app are ready for use, you can teach-in
additional Homematic IP devices and allocate them in
the app to dierent rooms.
• Tap on the menu symbol in the top left of the
screen of your app (see „5.3 Home screen“ on
page 25) and select the menu item “Teach-
in device”.
• Establish the power supply of the device you
want to teach-in, in order to activate the
teach-in mode. For further information, please
refer to the operating manual of the corre-
sponding device.
• Follow the instructions of the app step by step.
• In the app, give the device a name and create
a new room or allocate the device to an exist-
ing room.
Please define the device names very carefully in
order to avoid assignment errors when using
various devices of the same type. You can also
change the device and room names later on.
If the LED lights up dierently, please follow the
instructions in the app or see „6.3 Error codes
and flashing sequences“ on page 28.
• The Access Point is registered to the server.
This may take a few minutes. Please wait.
• After successful registration, please press the
system button of your Access Point for con-
firmation.
• Teaching-in will be carried out.
• The Access Point is now set up and immedi-
ately ready for use.
5.4 Operation
You can use dierent control elements in the Home-
matic IP app for a time-controlled regulation of the
room temperature according to your personal settings.
5.4.1 Heating profiles
With freely programmable heating profiles you can de-
fine individually tailored temperatures for each room at
any time. No matter if you have a regular daily routine
or if you are working in a shift: you can define up to
three individually tailored heating profiles per room
with up to six heating and cooling phases per day.
• Tap on the menu symbol (H) and select the
menu item “Heating profiles”.
• Select the profile in the desired room.
• You can adjust the profile name (e.g. early shift).
• Select a weekday to configure the heating
phases.
The base temperature defines the permanent
temperature that is maintained in a room, if the
heating profile is not in a heating or cooling
phase.
• Tap on “+” to add new heating and cooling
phases.
5.3 Home screen
After having taught-in your Homematic IP devices and
allocated them to rooms, they will be displayed in the
home screen of your app along with additional infor-
mation.
N
L
K
J
I
M
H
(H) Main menu
(I) Symbols (e.g. radio communication errors, open
window, empty battery)
(J) Current setpoint temperature
(K) Location and weather information
(L) Automatic or eco mode
(M) Current heating profile
(N) Room