User manual
27
Hazard information
The dimming actuator is only suitable for light
bulbs and high-voltage and low-voltage halogen
lamps with conventional transformers! Please
only connect lamp loads to the dimming actua-
tor, and no televisions, computers, motors etc.
The dimming actuator contains a thermal cut-o.
Please note that in the event of overheating the
loads will be switched o completely.
Switching on of loads during power-on state (dim-
ming level unequal to 0) is not permitted. Doing so
may generate very high inrush currents that can
destroy the device.
Please note that 230V LED lamps may glow or
flash while they are switched o due to the very
low power consumption.
The device may only be operated within
residential buildings.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall
invalidate any warranty or liability.