operation manual

33
Start-up
follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item “Teach-in device”.
• Press the latches of the battery compartment
cover (A) and open the battery compartment.
• Remove the insulation strip from the battery
compartment. Teach-in mode remains activated
for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (B)
shortly (see figure 3).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED (B) lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• Please select the application (for example, light
and/or security) in which the device will be used.
• In the app, give the device a name and allocate
it to a room.